植物栽培与组培

育苗容器规格对橡胶树籽苗芽接苗生长的影响

  • 周 珺 ,
  • 王 军 ,
  • 林位夫
展开
  • (1.中国热带农业科学院橡胶研究所,海南 海口 571101;2.农业部儋州热带作物科学观测试验站,海南 儋州 571737)
周珺,博士,从事橡胶树种苗科学与技术研究。

收稿日期: 2019-04-04

  修回日期: 2019-05-09

  网络出版日期: 2019-09-30

基金资助

中国热带农业科学院基本科研业务费专项(1630022019004);现代农业产业技术体系建设专项“国家天然橡胶产业技术体系种苗扩繁与生产技术岗位专家经费”(CARS-33-YZ4)

Growth Effect of Different Sizes of Root-controlled Containers on Rubber Mini-seedling Budding

  • ZHOU Jun ,
  • WANG Jun ,
  • LIN Wei-fu
Expand
  • (1.Rubber Research Institute, Chinese Academy of Tropical Agricultural Sciences, Haikou 571101, Hainan China; 2.Danzhou Investigation & Experiment Station of Tropical Crops, Ministry of Agriculture, Danzhou 571737, Hainan China)

Received date: 2019-04-04

  Revised date: 2019-05-09

  Online published: 2019-09-30

摘要

采用不同规格控根育苗容器对橡胶树籽苗芽接苗进行悬空和近地培养,观测其生长情况。结果表明,悬空培养对橡胶树籽苗芽接苗的纵向伸长(株高、主根长度)影响较为显著。育苗容器的高度一致时,体积越大的育苗容器,根系伸展空间越多,苗木地上部分长势越好;体积一致时,高度越高的育苗容器,苗木主根长度越长,但对籽苗地上部分及主根粗度影响较小。

本文引用格式

周 珺 , 王 军 , 林位夫 . 育苗容器规格对橡胶树籽苗芽接苗生长的影响[J]. 亚热带植物科学, 2019 , 48(03) : 303 -305 . DOI: 10.3969/j.issn.1009-7791.2019.03.018

Abstract

The growth vigor of rubber mini-seedling budding was observed by suspension and near-ground culture with different specifications of root-controlled containers. The results showed that suspension culture had a significant effect on the longitudinal elongation (such as plant height and main root length) of rubber grafted seedlings. When the height of seedling containers was the same, the larger volume of seedling containers, the more extension space of root system and better growth of the seedling’s above-ground part. When the volume was the same, the higher height of seedling containers, the longer length of seedling’s main roots. But there were little influence on the above-ground part of seedlings and the diameter of main roots.

参考文献

[1] 杨喜田,董娜琳,闫东锋,佐舖宣行,赵勇. 不同培育时间侧柏种基盘苗根系生长和分布[J]. 生态学报, 2011,31(19): 5818—5823.
[2] 阿力木江?玉素甫. 控根容器苗木培育技术[J]. 新疆林业, 2013(3): 23—24.
[3] 林位夫,谢贵水,黄守锋,蔡明道,陈俊明. 橡胶籽苗芽接育苗法初步推广及籽苗芽接苗多点试验[J]. 热带农业科学, 1999,19(3): 39—43.
[4] 林位夫,谢贵水,黄守锋,蔡明道,陈俊明. 橡胶树籽苗芽接技术研究—橡胶树籽苗芽接育苗法研究之一[J]. 热带作物学报, 1998,19(3): 9—15.
[5] 林位夫,周珺,王军. 应对胶价低迷的生产技术对策探讨[J]. 热带农业科学, 2015,35(4): 1—3.
[6] 林位夫,王军,周珺. 中国植胶业发展趋势与策略研究[J]. 热带农业科学, 2016,36(6): 81—84.
[7] 林位夫,王军,周珺. 关于我国植胶业发展的一些思考[J]. 中国热带农业, 2016,71(4): 4—8.
[8] 周珺,王军,林位夫,蔡明道. 不同悬空培养高度对橡胶树小筒苗接穗生长的影响[J]. 热带农业科学, 2015,35(9): 1—3.
[9] 林位夫,周珺,王军,周立军,蔡明道,曾宪海,张希财,陈先红. 一种橡胶树容器苗的悬空培育方法: 中国, CN103609282A[P]. 2014-03-05.
[10] 袁冬明,林磊,严春风. 乐东拟单性木兰容器大苗培育技术的研究[J]. 浙江林业科技, 2010,30(6): 43—47.
[11] 杨小胡,陈永忠,陈隆升,罗建,殷元良. 油茶育苗容器规格筛选研究[J]. 中国农学通报, 2013,29(19): 54—56.
[12] 黎明,韦叶桥,蒙愈,冯海,陈金新. 不同基质和育苗容器规格对格木幼苗生长的影响[J]. 南方农业学报, 2015,46(9): 1646—1650.
[13] 于志民,刘玮,邓志平,涂淑萍,邓光华. 不同类型及规格育苗容器对猴樟1年生苗生长的影响[J]. 南方农业学报, 2016,4(12): 2118—2123.
文章导航

/