橡胶树PR107微割排胶影响面的膨压测定及分析

肖再云; 校现周

doi:10.3969/j.issn.1009-7791.2010.04.001

亚热带植物科学 >

2010 , Vol. 39 >Issue 04: 1 - 3

DOI: https://doi.org/10.3969/j.issn.1009-7791.2010.04.001

研究报告

橡胶树PR107微割排胶影响面的膨压测定及分析

肖再云 ,
校现周

展开

1. 中国热带农业科学院橡胶研究所, 海南儋州 571737;
2. 云南省热带作物科学研究所, 云南景洪 666100;
3. 海南大学园艺园林学院, 海南儋州 571737

肖再云(1968-),湖南祁东人,副研究员,博士,从事植物逆境生理研究。

收稿日期: 2010-06-09

网络出版日期: 2010-12-10

基金资助

科技部农业科技成果转化资金项目(2008GB23260397)

收起

The Analysis of Turgor Pressure of Trunk in the Flow Area on a Rubber Tree (Hevea brasiliensis) Clone PR107

XIAO Zai-yun ,
XIAO Xian-zhou

Expand

1. Rubber Research Institute, Chinese Academy of Tropical Agricultural Sciences, Danzhou 571737, Hainan China;
2. Yunnan Institute of Tropical Crops, Jinghong 666100, Yunan China;
3. College of Horticulture and Landscape, Hainan University, Danzhou 571737, Hainan China

Received date: 2010-06-09

Online published: 2010-12-10

Fold

摘要

对中国热带农业科学研究院试验场7队割制为割阴刀、1/8树围四天一刀(1/8s↑d/4)的橡胶树品种PR107胶树不同高度树干进行膨压测定。结果表明,割胶前橡胶树树干膨压分布不均匀,割胶后膨压下降较少。说明胶树茎干膨压一直维持在较高水平是气刺微割排胶时间较长的原因之一。

关键词： 橡胶树; 微割; 排胶影响面; 膨压

本文引用格式

肖再云 , 校现周 . 橡胶树PR107微割排胶影响面的膨压测定及分析[J]. 亚热带植物科学, 2010 , 39(04) : 1 -3 . DOI: 10.3969/j.issn.1009-7791.2010.04.001

Abstract

Micro-cut is a new exploiting technique.There is a significant correlation between flow area and latex yield.Turgor pressure of trunk in the flow area on a rubber tree (Hevea brasiliensis) Clone PR107 with 1/8s↑d/4 tapping system was measured at NO.7 trial team, Chinese Academy of Tropical Agricultural Sciences.The result showed that there were differences among turgor pressure of different loci of trunk, and all of them decreased less after tapping.Turgor pressure of trunk keeping a comparative higher level is one of factors that flow of rubber trees with micro-cut and gaseous stimulation kept longer.

Key words： Hevea brasiliensis; micro-cut; flow area; turgor pressure

Options

文章导航

〈

〉

闽ICP备11008787号-5　

模态框（Modal）标题

摘要

本文引用格式

Abstract